|Place of Origin:||Jiangsu, China|
|Minimum Order Quantity:||one set|
|Packaging Details:||Nude Packing|
|Delivery Time:||30-45 days|
|Payment Terms:||T/T, L/C|
|Condition:||New||Application:||Machinery & Hardware, Scrap Metal/car/bicycle/can,etc|
|Power:||700KW/1000 HP||Type:||Horizontal Crushing Machine|
scrap shredder machine,
metal recycling shredder
PSX-700 Type scrap steel/car shredding assembly line
Shear material crusher is a heavy-duty metal shredder equipment, which is a machine equipment used to shred scrap metal materials. It can shred large cars, motorcycles, steel plates, steel, iron frames, iron iron buckets, aluminum, waste aluminum products, waste paint buckets, etc. into metal particles between 30-80mm, reducing the large footprint. Metal materials, which facilitates transportation and subsequent processing operations. Shear material crusher equipment is a large-scale shredding equipment. Because the shredded material is a strong hardness metal material, the scrap steel shredder blades and accessories are extremely demanding. Therefore, the cutters are made of special alloy steel and are durable.
1. The fixed operation of the crusher should be fixed on the cement foundation. If the work place is frequently changed, the DHAI scrap crusher and motor should be installed on the base made of angle iron. If the crusher is powered by a diesel engine, the power of the two should be matched, that is, the power of the diesel engine is slightly greater than the power of the crusher, and the pulley grooves of the two are consistent. The outer surface of the pulley must be on the same plane.
2. Before starting, you must check whether the connecting bolts of all parts of the scrap steel crusher unit are tight, whether the transmission belt is tight, and whether the power cord is good. Whether the motor shaft and the crusher shaft are parallel.
3. Check whether the hammer piece is good, whether the hole diameter of the sieve piece is suitable, and whether there is damage. Drag the belt by hand to check whether the main shaft rotates flexibly, and whether there is any card, bump and friction.
4. After turning on the machine, let the equipment idle for 2-3 minutes, check whether the rotor is turned correctly, and whether the sound is normal. It can only work after rotating smoothly at the rated speed.
Wide of feed opening(mm)
Power of machine(kw/HP)
Contact Person: admin