High Pressure Industrial Baler Machine High Capacity High Safety

The Y83Q-135 Front Out Metal Baler is a practical hydraulic baling machine designed for small and medium-sized scrap yards, aluminum processing plants, metal fabrication workshops, and recycling companies. It is used to compress aluminum scrap, light steel scrap, metal offcuts, stamping waste, aluminum profile offcuts, aluminum cans, and other compressible metal materials into regular bales.

The machine is equipped with a 1350kN nominal force, equal to approximately 135 tons of pressing force, and a 1300×600×600mm compression chamber. It is suitable for medium-volume scrap handling and daily recycling operations. With its forward-out discharging structure, the finished bale is pushed out from the front of the machine, making bale collection, stacking, and forklift transfer more convenient.

Compared with large fully automatic baling systems, the Y83Q-135 offers a simpler structure, easier operation, and lower investment pressure. It adopts hand valve control, allowing operators to control the compression process directly after basic training. This makes it suitable for customers who do not require a highly automated system but still want to improve scrap handling efficiency.

The bale size is (50–300)×600×240mm, and the bale density can reach more than 1800kg/m³. The machine capacity is about 1800–2500kg/h, with a single cycle time of less than 150 seconds. For customers who want to reduce manual handling, improve scrap storage, and make loading more efficient, the Y83Q-135 Hydraulic Metal Baler provides a reliable and cost-effective solution.

The machine is manufactured according to the ISO9001:2000 standard. WANSHIDA also provides one year guarantee and lifelong maintenance support. Machine configuration can be adjusted according to material type, local voltage, discharge direction, and operating habits.

Many metal processing plants and recycling yards do not need a large automatic production line at the beginning. In real working conditions, the daily scrap volume may be moderate, but if the scrap is handled only by manual sorting and temporary storage, the site can still face many problems.

For example, aluminum processing plants generate aluminum profile ends, aluminum strips, aluminum pieces, and sheet offcuts every day. Small scrap yards receive aluminum cans, thin steel sheets, light steel scrap, and mixed non-ferrous scrap. Metal fabrication workshops also produce loose offcuts during cutting, stamping, and blanking.

These materials may not be extremely heavy, but they are loose, irregular, and space-consuming. Without a fixed baling process, customers may experience:

• slow turnover of scrap bins;
• repeated manual cleaning and handling;
• blocked workshop aisles;
• less standardized weighing and delivery;
• low truck loading efficiency;
• unstable resale value due to poor bale condition.

For these customers, the main issue is not always high production volume. The real problem is often the lack of a standardized scrap management process. A suitable Front Out Metal Baler helps turn daily loose scrap into regular bales and makes scrap handling a planned workflow instead of occasional cleaning work.

The Y83Q-135 Front Out Metal Baler is designed to help customers compress scrap metal with low operation complexity. It does not simply pursue oversized capacity. Instead, it focuses on practical daily scrap handling.

The machine uses hydraulic pressure to compress loose scrap into bales with a fixed section. After the scrap is loaded into the 1300×600×600mm chamber, the operator uses the hand valve to control the pressing action. Once the bale is formed, it is pushed out from the front of the machine.

This solution helps customers:

• turn loose scrap into compact bales;
• reduce pressure on scrap bins and storage areas;
• improve scrap turnover speed;
• make forklift handling and truck loading easier;
• improve bale appearance and sales standardization;
• reduce dependence on skilled manual sorting;
• make scrap handling more stable and predictable.

For aluminum scrap and light metal scrap, the compressed bale is easier to weigh, store, and deliver. Customers do not need to invest in a complicated automatic line to improve daily recycling efficiency.

The machine is suitable for compressing aluminum profile offcuts, aluminum strips, aluminum sheet waste, and aluminum plate offcuts. It helps reduce the scrap storage area during daily production.

It can handle aluminum cans, light steel scrap, thin sheet metal, mixed metal pieces, and compressible non-ferrous scrap. After baling, the material is easier to classify, sell, and transport.

Loose metal offcuts from stamping, cutting, and blanking can be compressed into regular bales, reducing disorder in the workshop.

The machine is suitable for companies that need to compress, weigh, store, and transfer medium-volume scrap metal.

Steel mills, aluminum plants, and metal reprocessing companies can use compact bales as pre-treated furnace materials for easier storage and feeding.

Suitable materials include:

• aluminum profile offcuts
• aluminum cans
• aluminum sheet and plate offcuts
• light steel scrap
• thin sheet metal
• stamping offcuts
• copper and aluminum offcuts
• compressible non-ferrous scrap
• sheet metal waste and mixed light scrap

The Y83Q-135 Metal Baler compresses scrap metal through hydraulic pressure. The process is simple and suitable for daily repeated operation.

Operators load aluminum scrap or light scrap metal into the compression chamber. Feeding can be done manually or with a forklift or grab, depending on site conditions.

The operator controls the machine through the hand valve. The hydraulic system pushes the pressing plate to compress the scrap. Hand valve control allows flexible operation according to material condition.

The scrap is compressed into a bale with a 600×240mm section. The bale length usually ranges from 50 to 300mm, depending on feeding volume and scrap type.

After compression, the bale is pushed out from the front. This structure makes the discharge direction clear and suitable for compact workshops and recycling yards.

The finished bales can be stacked, weighed, loaded, or delivered to downstream recycling companies.

The Y83Q-135 is more suitable for aluminum scrap, light steel scrap, sheet metal waste, and metal offcuts. For thicker or harder scrap, a higher-force model may be required.

With a capacity of 1800–2500kg/h, this model is suitable for small and medium recycling yards or processing plants. For larger scrap volume, a bigger model or PLC-controlled configuration may be recommended.

The forward-out design is suitable for customers who want the bale to discharge from the front. If the site has special layout restrictions, the discharge direction should be confirmed before purchase.

Hand valve control is suitable for sites with manual operation. It is simple and easy to maintain. For customers who want to reduce manual operation, a more automated configuration can be selected.

The machine can be customized according to local voltage. Before purchase, customers should confirm power supply, installation space, ground bearing capacity, and feeding method.

Yes. It can bale aluminum profile offcuts, aluminum cans, aluminum pieces, and aluminum sheet waste. If the aluminum scrap is very bulky, material photos and dimensions are recommended for chamber size confirmation.

This model uses hand valve control. It is simple to operate and suitable for manual operation. If higher automation is required, PLC control can be customized.

The bale is pushed out from the front of the machine. This makes the discharge direction clear and makes bale collection, stacking, and forklift transfer easier.

The bale density can reach more than 1800kg/m³. The actual density depends on material type, impurity level, and compression condition.

Yes. WANSHIDA can customize the machine according to the voltage and frequency requirements of the customer’s country.

Compared with large automatic baling systems, the Y83Q-135 has a simpler structure and is suitable for customers who want to improve scrap handling efficiency while controlling investment cost.

The bale is discharged from the front, making it easier to arrange the collection area and observe bale output.

The hand valve system is direct and easy to maintain, making it suitable for daily use in recycling yards and processing plants.

The 135 ton pressing force is suitable for aluminum scrap, light steel scrap, and metal offcuts, helping increase scrap density.

The power configuration is suitable for daily metal baling work and provides a balance between energy consumption and processing performance.

Compressed metal bales are easier to weigh, stack, load, and deliver to downstream buyers.

WANSHIDA can provide configuration suggestions based on scrap material, site space, voltage, discharging method, and operating habits.

WANSHIDA provides one year guarantee and lifelong maintenance support for the Y83Q-135 Front Out Metal Baler. We can provide operation instructions, installation and commissioning advice, spare parts supply, remote technical support, and maintenance guidance.

If customers have questions about operation, maintenance, or spare parts during machine use, they can contact us by email, phone, or online communication. WANSHIDA’s engineering team will provide support according to the actual situation and help customers keep the machine running reliably.