Q43P-600A Scrap Metal Shredder With Dia.300mm Blades And 20-Piece Cutter Set For Waste Volume Reduction

Q43P-600A Scrap Metal Shredder with Dia.300mm Blades

and 20-Piece Cutter Set for Waste Volume Reduction

 

The Q43P-600A Metal Shredder is an industrial shredding machine designed for waste size reduction, scrap metal recycling pre-treatment, and general industrial waste processing. It is equipped with Dia.300mm blades, 20pcs cutters, a 610×550mm shredding room, and a 7.5kW motor, making it suitable for reducing irregular waste materials into smaller pieces for easier handling, sorting, baling, transportation, or further processing.

As a practical scrap metal shredder machine, industrial metal shredder, and waste metal shredder, the Q43P-600A can be used in recycling yards, metal processing workshops, industrial waste treatment sites, and small to medium recycling facilities. The machine is mainly used at the front stage of the recycling process for volume reduction, rough shredding, and material pre-treatment.

With an overall size of 2160×840×1600mm and a machine weight of approximately 2000kg, this model is compact enough for facilities with limited installation space while still offering stable shredding performance for suitable waste materials.

Cause

In scrap metal recycling and industrial waste processing, many customers face similar challenges:

1. Large waste volume

Scrap materials often have irregular shapes and occupy large storage space before processing. This increases handling difficulty and transportation cost.

2. Inefficient downstream processing

Oversized waste materials may not be suitable for direct feeding into balers, conveyors, sorting lines, or other recycling equipment.

3. Low efficiency of manual cutting

Manual cutting or simple dismantling is time-consuming and may create safety risks for operators.

4. Need for pre-treatment before recycling

Many recycling facilities need a front-end shredder to reduce material size before sorting, baling, transporting, or further crushing.

Solution

The Q43P-600A Scrap Metal Shredder provides a practical pre-treatment solution for waste volume reduction. Through low-speed rotating blades, the machine cuts, tears, and squeezes waste materials into smaller pieces.

This model helps customers by:

• Using Dia.300mm blades for stable shredding performance;
• Equipping 20pcs blades for continuous shredding operation;
• Running at 16rpm low speed, suitable for rough shredding and size reduction;
• Providing a 610×550mm shredding room for suitable waste materials;
• Producing output pieces of approximately 30×30mm;
• Using a 7.5kW motor, suitable for small to medium recycling needs;
• Offering a compact machine structure for easier installation in recycling workshops or processing lines.

For customers handling scrap metal, industrial offcuts, light waste materials, and mixed solid waste, this metal shredder machine can help improve the efficiency and consistency of the recycling process.

Specifications

Application

The Q43P-600A scrap metal shredder can be used in various recycling and waste pre-treatment applications.

1. Scrap metal recycling yards

It can be used for reducing the volume of suitable light scrap metal, metal offcuts, small waste pieces, and irregular scrap materials before transportation or baling.

2. Metal processing workshops

Metal workshops often generate offcuts and leftover materials. This shredder can help process such waste before recycling.

3. Industrial waste pre-treatment

For irregular waste materials that are difficult to store, transport, or process directly, this shredder can be used as a front-end size reduction machine.

4. Recycling sorting line

The machine can be installed before a sorting, conveying, baling, or secondary processing line to make material size more manageable.

5. Small and medium recycling centers

With a compact structure and moderate capacity, Q43P-600A is suitable for recycling facilities that need a reliable shredder but do not require a large heavy-duty shredding line.

How It Works

The working process of the Q43P-600A Metal Shredder includes the following steps:

1. Feeding

Waste materials are fed into the machine through the hopper. The hopper feeding mouth is 510×720mm.

2. Shredding

Inside the shredding room, the blades rotate at approximately 16rpm. The materials are cut, squeezed, and torn by the rotating cutter system.

3. Volume reduction

Large or irregular waste materials are gradually reduced into smaller pieces through repeated shredding action.

4. Discharging

After shredding, the output pieces are discharged from the machine. The reference output size is approximately 30×30mm.

5. Downstream processing

The shredded materials can then be sent to a baler, conveyor, sorting system, magnetic separator, or other recycling equipment.

How To Choose

Before selecting a scrap metal shredder, customers are advised to confirm the following information.

1. Material type

Different materials require different blade strength, power, and machine structure. Please confirm whether the main materials are:

• Scrap metal offcuts;
• Light metal waste;
• Industrial waste;
• Mixed waste;
• Plastic, sheet waste, or other solid waste.

For harder, thicker, or heavier materials, customers are advised to provide material photos, dimensions, thickness, and hardness information for technical evaluation.

2. Required capacity

The reference capacity of Q43P-600A is 1–2m³/h. If a higher processing capacity is required, a larger shredder model or higher power configuration may be recommended.

3. Feeding size

The shredding room size is 610×550mm, and the hopper feeding mouth is 510×720mm. If the material size is larger, customers should confirm whether pre-cutting is possible or whether a larger feeding opening is needed.

4. Target output size

The reference output size is approximately 30×30mm. If the customer has a special requirement for output size, this should be discussed before quotation.

5. Downstream process

If the shredded material will be sent to a baler, conveyor, sorting system, magnetic separator, or secondary crusher, the full recycling process should be shared in advance so that a suitable solution can be recommended.

6. Local power standard

The motor power is 7.5kW. The power supply can be confirmed according to the customer’s local standard, such as 380V/50Hz/3Phase, 415V/50Hz/3Phase, or 220V/60Hz/3Phase.

Advantages

1. Compact structure

With an overall size of 2160×840×1600mm, the machine is easier to install than large shredding lines and is suitable for workshops with limited space.

2. 20-piece blade configuration

The machine is equipped with 20pcs blades, each with a thickness of 30mm, supporting continuous shredding for suitable waste materials.

3. Low-speed shredding

The machine operates at around 16rpm, which is suitable for rough shredding and waste volume reduction.

4. Suitable output size for downstream processing

The reference output size is approximately 30×30mm, making the material easier to sort, transport, bale, or further process.

5. Suitable for recycling pre-treatment

The Q43P-600A can be used as a front-end pre-treatment machine in scrap metal recycling, industrial waste processing, and offcut recycling.

6. Customization support

If the customer’s material size, hardness, capacity, or output requirement is different, our engineering team can provide technical suggestions and evaluate customized solutions.

FAQ

Q1: What materials can the Q43P-600A Metal Shredder process?

A: It can be used for volume reduction and pre-treatment of suitable scrap metal offcuts, industrial waste, small waste pieces, light waste materials, and other solid waste. The exact suitability depends on material size, thickness, hardness, and shape.

Q2: What is the capacity of this scrap metal shredder?

A: The reference capacity is 1–2m³/h. The actual capacity may vary depending on material type, thickness, feeding method, and operating conditions.

Q3: What is the output size after shredding?

A: The reference output size is approximately 30×30mm. The actual output size may vary depending on material characteristics and feeding condition.

Q4: Is this machine suitable for heavy scrap steel?

A: Q43P-600A is more suitable for small to medium waste size reduction and pre-treatment. For heavy scrap steel, large metal parts, or high-strength thick materials, we recommend providing material details for engineering evaluation.

Q5: Can the voltage be customized?

A: Yes. The power supply can be configured according to the customer’s local voltage, frequency, and phase requirements. Please provide your local power standard before quotation.

After-Sales Service

We provide reliable after-sales support for the Q43P-600A Metal Shredder:

• One year guarantee;
• Lifelong maintenance support;
• Remote technical guidance;
• English operation manual available;
• Spare parts and wearing parts support;
• Machine testing before shipment;
• Technical communication by email, phone, or video call;
• Engineering support for installation, operation, and maintenance suggestions.

With many years of experience in manufacturing recycling equipment, WANSHIDA can support customers from model selection, technical confirmation, production, testing, shipment, and after-sales service. Our goal is to help customers build a more efficient and stable waste recycling process.